What is Block?
Block Concrete Types Used in the Building Sector for the Purpose of Forming External Wall and Internal Separator Wall are generally called Blocks. Block Stone Saves Time in Creating Walls Because of Its Surface Size. Minimize Wall Curvatures Caused by Worker Errors. Since its load carrying capacity is higher than bricks and similar materials, it plays a supporting role in building statics. Contributes to insulation since it has low sound and thermal conductivity. It shows higher resistance than the brick in any impact that may come to the forming wall. Since Block Can Produce Fully Filled, Having Internal Spaces or Fragile, Since No Extra Roughness Will Form on the Wall of the Building, We Can Also Answer the Question of What Is a Block, if we say that it also reduces the cost of plastering mortar. Block Production is Made with Block Machine. It is quite easy to supply blocks by finding a block machine factory according to the national economy. Since the Block Machine can produce construction materials such as curbstone, paving stone, grass stone, pumice, styrofoam pumice and rain gutter at the same time, you can supply all materials that may be needed in building and environmental arrangements.
Cities, Climate and Climatic Behavior Differences Due to Geographical Location, Urban and Country Economy, Level of Development, Compulsory Standards Brought by Countries for Their Special Building Materials, Play a Decisive Role in Block Measurements. Since Block Stone is used to create an outer wall and an inner separating wall, it is produced by the block machine in block factories of different sizes and thicknesses. Even if it is not accepted to specify a size as a standard, it is usually produced in 10 cm 15 cm 20 cm 25 cm 30 cm length and 20 cm height. The Block Factory, which will produce Blocks, manufactures the Block Mould with the Block Sizes Determined According to the Market It Addresses to the Factory where the Block Machine Production is made.
How Many Blocks Expend 1m2
In order for the Block Stone Manufacturer to respond to the market it addresses, the Required Production Number, the Required Quantity of the Block Stone Buyer, the Architect or the Contractor must calculate how many 1 M2 Block Expenses in the Cost Calculations. How many blocks in 1 M2 varies according to the width and height of the block. If we divide 10,000 by the product of the block width and height with a simple formula, we get the result of 1m2 blocks.
It is a Type of Styrofoam Pumice Block Stone, Also Known as Light Block, Heat Insulated Block, Insulated Block Produced with Natural Aggregate. It helps sound and heat insulation thanks to its hollow structure, it provides a serious decrease in the dead weight of the building compared to other structural elements due to its lightness, it has the ability to adjust the humidity rate due to its aggregate structure, and it prevents the formation of dampness in the building. It has high machinability. In this way, ease of application and wall problems due to worker errors are at minimum level. Thanks to its perforated structure, cracking and similar deformations do not occur on the wall due to its high plaster grip.
Type of Aggregate Used, Filling Space Ratio of the Blocks Obtained as a Result of Production, Mobility in the Market Addressed by the Manufacturer. Zoning Status of the City, Differences in Block Sizes are the Factors Determining Block Prices.